Before doing this procedure, please make sure you have the legacy version of Glorious CORE downloaded and installed.
Run CORE and click on the pairing utility tool - you can find it on the lower-left sidebar.
In the following screenshots, we are showing you how to pair the Model O 2 Wireless mouse with the receiver. The procedure is identical for the Model I 2 Wireless as well, as long as you have the V2 Wireless Receiver Kit (also comes bundled with your V2 mouse purchase).
- Unplug all Glorious mouse cables & receivers.
- Plug in the Wireless Model O 2 via USB cable. Plug in its wireless receiver.
- Select the Model O 2 Wireless from the drop down menu.
- Click the “PAIR” button once both the mouse and receiver show as connected.
Follow the pairing instructions that CORE will provide.
- In summary, unplug the mouse from USB and turn the mouse switch to “OFF”.
- While holding down the scroll wheel button, touch the mouse to the receiver and put the mouse into 2.4GHz mode via the switch on the bottom of the mouse.
- Continue holding the scroll wheel button for approximately 4 seconds until the LEDs blink green.
Keep holding the mouse wheel button down until CORE displays a “Pairing Successful” message.
Congratulations! You can now use your mouse wirelessly! :)