Home > Glorious Mice > Wireless Mice > How To Pair Your V2 Wireless Mouse With The Wireless Receiver

How To Pair Your V2 Wireless Mouse With The Wireless Receiver

Before doing this procedure, please make sure you have the latest version of Glorious CORE downloaded and installed.


Run CORE and click on the pairing utility tool - you can find it on the lower-left sidebar.

In the following screenshots, we are showing you how to pair the Model O 2 Wireless mouse with the receiver. The procedure is identical for all V2 mice as long as you have the V2 Wireless Receiver Kit (also comes bundled with your V2 mouse purchase).

  • Unplug all Glorious mouse cables & receivers.
  • Plug in the Wireless Model O 2 via USB cable. Plug in its wireless receiver.
  • Select the Model O 2 Wireless from the drop down menu.
  • Click the “PAIR” button once both the mouse and receiver show as connected.

  • Follow the pairing instructions that CORE will provide.

  • In summary, unplug the mouse from USB and turn the mouse switch to “OFF”. 
  • While holding down the scroll wheel button, touch the mouse to the receiver and put the mouse into 2.4GHz mode via the switch on the bottom of the mouse.
  • Continue holding the scroll wheel button for approximately 4 seconds until the LEDs blink green.
  • Keep holding the mouse wheel button down until CORE displays a “Pairing Successful” message.

Congratulations! You can now use your mouse wirelessly! :)